Safety Instructions And General Warning - Danfoss VLT Automation Drive FC 300 Instruction Manual

VLT ® Automation Drive FC 300
Instruction Manual High Power

2 Safety Instructions and General Warning

Caution
The adjustable frequency drive DC link capacitors remain charged after power has been disconnected. To avoid the electrical shock hazard, dis-
connect the adjustable frequency drive from line power before carrying out maintenance. Before servicing the adjustable frequency drive, wait the
minimum amount of time indicated below:
380-500 V
525-690 V
This Instruction Manual can be used for all FC 300 adjustable frequency drives with software version 4.9x.
The software version number can be seen from parameter 15-43.
Equipment containing electrical components may not be disposed of together with domestic
waste.
It must be collected separately as electrical and electronic waste according to local and currently
valid legislation.
120-300 hp [90-200 kW]
350-1000 hp [250-800 kW]
50-450 hp [37-315 kW]
500-1350 hp [355-1000 kW]
FC 300
Instruction Manual
Software version: 4.9x
MG.33.U2.22 - VLT ® is a registered Danfoss trademark
2 Safety Instructions and General Warning
20 minutes
40 minutes
20 minutes
30 minutes
2
2-1