Danfoss VLT Automation Drive FC 300 Instruction Manual page 27

VLT ® Automation Drive FC 300
Instruction Manual High Power
Be aware that the power cables are heavy and hard to bend. Give thought to the optimum position of the adjustable frequency drive for ensuring easy
installation of the cables.
NOTE!
All D enclosures are available with standard input terminals or disconnect switch. All terminal dimensions can be found in the table on
the next page.
Enclosure D1
A 277 (10.9)
B 227 (8.9)
C 173 (6.8)
D 179 (7.0)
E 370 (14.6)
F 300 (11.8)
G 222 (8.7)
H 139 (5.4)
I 55 (2.2)
J 354 (13.9)
K 284 (11.2)
L 334 (13.1)
M 250 (9.8)
N 167 (6.6)
O 261 (10.3)
P 170 (6.7)
Q 120 (4.7)
R 256 (10.1)
S 308 (12.1)
T 252 (9.9)
U 196 (7.7)
V 260 (10.2)
Table 3.1: Cable positions as shown in drawings above. Dimensions in mm (inches).
IP 21 (NEMA 1) / IP 54 (NEMA 12)
Enclosure D2
379 (14.9)
326 (12.8)
273 (10.8)
279 (11.0)
370 (14.6)
300 (11.8)
226 (8.9)
142 (5.6)
59 (2.3)
361 (14.2)
277 (10.9)
334 (13.1)
250 (9.8)
167 (6.6)
260 (10.3)
169 (6.7)
120 (4.7)
350 (13.8)
332 (13.0)
262 (10.3)
192 (7.6)
273 (10.7)
MG.33.U2.22 - VLT ® is a registered Danfoss trademark
IP 00 / Chassis
Enclosure D3 Enclosure D4
119 (4.7) 122 (4.8)
68 (2.7) 68 (2.7)
15 (0.6) 16 (0.6)
20.7 (0.8) 22 (0.8)
363 (14.3) 363 (14.3)
293 (11.5) 293 (11.5)
215 (8.4) 218 (8.6)
131 (5.2) 135 (5.3)
48 (1.9) 51 (2.0)
347 (13.6) 354 (13.9)
277 (10.9) 270 (10.6)
326 (12.8) 326 (12.8)
243 (9.6) 243 (9.6)
159 (6.3) 159 (6.3)
261 (10.3) 261 (10.3)
170 (6.7) 170 (6.7)
120 (4.7) 120 (4.7)
98 (3.8) 93 (3.7)
301 (11.8) 324 (12.8)
245 (9.6) 255 (10.0)
189 (7.4) 185 (7.3)
260 (10.2) 273 (10.7)
3 How to Install
3
3-15