HMS A8NDPV1 Instruction Manual page 6

Additional Instructions
Please note the following points to prevent equipment damage, injury or electrical shock.
Transportation and mounting
CAUTION
• Do not install or operate the plug-in option if it is damaged or has parts missing.
• Do not stand or rest heavy objects on the equipment.
• Check that the mounting orientation is correct.
• Prevent conductive items such as screws and metal fragments, or flammable substances such as oil
from entering the inverter.
Trial run
CAUTION
• To prevent unexpected equipment movement, confirm and adjust all required parameters prior to
starting operation.
Usage
WARNING
• Do not modify the equipment.
• Do not remove any inverter or option parts unless specifically instructed to do so in this manual.
CAUTION
• Performing a "parameter clear" or "all parameter clear" will reset all inverter parameters to their factory
default settings. After performing one of these operations, remember to reenter any custom parame-
ter values prior to starting operation.
• To prevent damage from electric discharge, always touch a grounded piece of metal prior to touching
any equipment.
Maintenance, inspection and parts replacement
CAUTION
• Do not perform hi-pot tests on the equipment.
Disposal
CAUTION
• Contact the local or state environmental agency in your area for details on the disposal of electrical
components and packaging.
General instruction
For clarity purposes, illustrations in this manual man be drawn with covers or safety guards re-
moved. Ensure all covers and safety guards are properly installed prior to starting operation.
IV Doc.Id. HMSI-216-127
Doc.Rev. 1.01