Network Connector (Dsub, Female) - HMS A8NDPV1 Instruction Manual

Network Connector (DSUB, female)

– Snap the LED cover into the front cover of the drive.
Fasten both front covers, top front cover first.
The option board is now mounted and power can be applied.
Removal
Remove both lids of the FR-A800 or FR-F800 inverter.
Remove the network cable.
Remove the screws.
Carefully remove the option board by lifting it straight up.
Remove the board spacers.
Replace the lids.
2.3 Network Connector (DSUB, female)
The option board provides connection to PROFIBUS through a female DSUB connector.
Pin Name
1 NC
2 NC
3 RxD/TxD-P
4 CNTR-P
5 DGND
6 VP
7 NC
8 RxD/TxD-N
9 NC
Shield PE
12
Description
Receive/Transmit data P; B-line
Repeater control signal (Direction control); RTS
signal
Data ground (Reference voltage to VP)
Power supply; (PSV)
Receive/Transmit data N; A-line
Installation
female
female
5 1
9 6
Doc.Id. HMSI-216-127
Doc.Rev. 1.01