Table of Contents
Advertisement
cPCI-MXS64 Technical Reference Manual
The Boot from LAN capability is supported. To enable the option, use the BIOS Setup
program. Please refer to Section 4.1 BIOS Setup Program.
A diskette entitled "Network Drivers for Intel 82559 is included with the cPCI-MXS64. It
contains network drivers for most common operating systems.
2.4. FLOPPY DISK INTERFACE
The onboard floppy disk controller is IBM PC XT/AT compatible. It handles 3.5" and
5.25", low and high density disks. Up to two drives can be supported in any combination.
Signal Paths
The Floppy Disk Controller interface is available through the cPCI I/O connector and
through the Mezzanine connector (see Section 1.4.1)
Related Jumpers
None.
BIOS Settings
Section 4.1.4 Standard CMOS: Select type of floppy.
Section 4.1.11 Integrated Peripherals: Enable/Disable onboard FDC Controller.
2.5. PS/2 KEYBOARD / PS/2 MOUSE INTERFACE
The onboard keyboard controller is 8042 software compatible. PS/2 Keyboard and mouse
signals are available through an output that supports direct connection to the interface.
Since signals of both devices are combined on the same connector, a Y-cable is required to
split the signals and feed a standard AT keyboard and a PS/2 mouse.
Signal Path
PS/2 keyboard and PS/2 mouse signals are available through J5 cPCI I/O connector
and J14 Mezzanine connector.
Related Jumpers
None.
BIOS Settings
11.3.7 Integrated Peripherals : USB Keyboard Support; PS/2 Mouse Function Control
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2-4
Advertisement
Table of Contents
