Ps/2-Mouse Interface; Connector - Kontron MOPSlcdLX User Manual

Chapter 13

13. PS/2-Mouse Interface

The Super I/O of the MOPSlcdLX supports a PS/2 mouse.

13.1 Connector

The PS/2 mouse interface is available on Connector X14001 (4pins). An adapter cable is required to connect
a standard PS/2 mouse. The cable is available from Kontron (KAB-MOUSE-PS2, Part Number 96062-0000-
00-0).
The following table shows the pinout and connections for a PS/2 mouse adapter.
Header
Note:
To protect the external power lines of peripheral devices, make sure that
1
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
To find the location of the PS/2 mouse connector on the MOPSlcdLX board, please see the Appendix
"Connector Layout".
Kontron User's Guide MOPSlcdLX
Pin Signal Name
1 MSDAT
2 (1)
VCC
3 GND
4 MSCLK
25
Function 6 pin MiniDIN PS/2
Mouse data
+5V
Ground
Mouse clock
PS/2-Mouse Interface
1
4
3
5