Table of Contents
Advertisement
2.3.
ETHERNET INTERFACES
Both Ethernet controllers reside on the Primary PCI bus.
Each interface supports 10Base-T and 100Base-TX specifications: 10Mbps and 100Mbps
network speeds are automatically detected and switched.
Signal Path
See note on page 1.5.
Related Jumpers
None.
BIOS Settings
Section 4.1.11 Integrated Peripherals: Enable/Disable Ethernet Controller.
2.3.1. Front Plate Configuration
Ethernet 1 and 2 signals are available on front plate connectors only when the board is
ordered for front access.
Activity and link indicators are built in the connector.
2.3
Feature Description
Advertisement
Table of Contents
