Laser Safety; Maintenance Safety - Xerox Document Centre ColorSeries 50 User Manual

Laser safety

CAUTION: Use of controls, adjustments, or
procedures other than those specified in this
documentation may result in a hazardous
exposure to laser radiation.
This equipment complies with international safety
standards. With specific regard to laser safety, the
equipment complies with performance standards
for laser products set by government, national,
and international agencies as a Class 1 laser
product. It does not emit hazardous light, as the
beam is totally enclosed during all phases of
customer operation and maintenance.

Maintenance safety

•
Do not attempt any maintenance procedure
that is not specifically described in the
documentation that is supplied with your
copier/printer.
•
Do not use aerosol cleaners. The use of
supplies that are not approved may cause
poor performance of the copier/printer, and
could create a dangerous condition.
•
Use the supplies and cleaning materials only
as directed in this manual. Keep all of these
materials out of the reach of children.
•
Do not remove the covers or guards that are
fastened with screws. There are no parts
behind these covers that you can maintain or
service.
Do not perform any maintenance procedures
unless you have been trained to do them by a
Xerox representative or unless a procedure is
specifically described in one of the copier/printer
manuals.
DOCUMENT CENTRE CS 50 USER GUIDE VI
1
2
3
4
5
6
7