Building Networks - Honeywell ControlEdge 900R04-0200 Getting Started

Chapter 7 - Application
118

Building networks

Prerequisites
Ensure that the network is configured in the FDM Server
Management tool.
To build the network
1. From the
Network View
network tree. The list of network interfaces appears.
2. Perform any one of the following to build the network.
Right-click the network interface and then click
l
FDM detects the devices connected to the network and are
displayed in the network view.
You can also build a network by, right-clicking the target
l
gateway and then clicking
devices connected to the network and are displayed in the
network view.
under Online view, expand
. FDM detects the
Build Network
FDM Server
.
Build Network