Configuring Hart; Configuring A Hart-Ip Server - Honeywell ControlEdge 900R04-0200 Getting Started

Configuring HART

HART supports two functionalities.
n
n
The controller enables the HART-IP client to exchange information
with HART field devices connected to the AI/AO channels in the
controller via a HART-IP Server.
The controller enables HART function blocks to access to the HART
field devices through HART-enabled AI/AO channels. Currently HART
command 3, command 48 and command X are implemented.
For more information, see "HART Configuration" in the ControlEdge
Builder Protocol Configuration Reference Guide.

Configuring a HART-IP Server

Prerequisite
A new project is created and a controller is added to the project in
ControlEdge Builder.
To set a controller as the HART-IP Server
b. Click the browse icon, and select a location to store the
exported file.
TIP: It is recommended to save the file to the folder
"\\ControllerIntegration" shared on the current primary
Experion server.
c. Enter a name for the exported file, and click
TIP: It is recommended to name the file as
"ControllerName_SAVED". For example, the controller
name is "NewController", then enter "NewController_
SAVED" for the file name.
d. Click . The exported file is saved successfully.
Export
e. Click .
OK
HART-IP client (FDM) communication
HART Function Block communication
Chapter 6 - Communication
.
Save
103