Table of Contents
Advertisement
CHAPTER
5
OPERATING
Connecting a controller
Click
appears.
1.
From the Home Page, click
appears.
2.
Click
Or click
controller.
You can connect to a physical controller or a controller
simulator. Select the controller type:
3.
Select the user name and enter the password.
4.
Click
If the current and previously connected controller types are
different, the following dialog appears. Click
configure the settings.
TIP: Due to the cyber security, ControlEdge Builder will
disconnect with the controller automatically if there is no
communication between them including displaying the
diagnostic view, uploading the datalog, downloading the
from the Home Page, and the
Connect
tab and select the target controller.
Scan and Select
tab and enter the IP address of the target
IP Address
: ControlEdge 2020 controller
l
: ControlEdge 2020 controller simulator
l
: ControlEdge 900 controller
l
: ControlEdge 900 controller simulator
l
.
Connect
Connect controller
, the
Connect
Connect controller
to automatically
OK
page
page
67
Hide quick links:
Advertisement
Table of Contents
