Chapter 4 - Software; Installing Controledge Builder; Launching Controledge Builder - Honeywell ControlEdge 900R04-0200 Getting Started

CHAPTER
4
SOFTWARE

Installing ControlEdge Builder

The following table lists the operation system and resolution
requirements for the PC installed ControlEdge Builder.
Item Specification
Windows 7 32-bit or 64-bit with SP1
Operation system
Windows 2008 32-bit or 64-bit with SP1
Windows 10 32-bit or 64-bit (Support secure communication)
Windows Server 2016 Standard Edition 64-bit
Resolution Recommended: 1280x800 or above
Optimal: 1920x1080, 1366x768, 1280x1024 and 1280x800
To install ControlEdge Builder
1. Insert the
2. Browse to the folder containing
Double-click this file.
3. Follow the screen prompts to install ControlEdge Builder.
For full instructions on how to install ControlEdge Builder, see the
ControlEdge Builder Software Installation User's Guide.

Launching ControlEdge Builder

Click
Builder
Start Page is outside any project context, and enables the user to
select an action to start. It provides several actions:
Create Project
n
default controller configuration.
Open Project
n
Connect
n
ControlEdge Builder Media Kit
> >
Start All Programs Honeywell
to launch ControlEdge Builder and the Start Page appears.
: click the icon to create a new project with the
: click the icon to open an existing project.
: click the icon to connect to a controller.
into the DVD-ROM drive.
ControlEdge_builder_setup.exe
> >
ControlEdge Builder
.
ControlEdge
41