Honeywell ControlEdge 900R04-0200 Getting Started page 21

Item Description
4 Ethernet LED status indicators for communications functions.
Rotary switch: used to set the EPM address and network topology for the I/O
5
rack.
Set the 10x and 1x switches to the two digit address ranging from 01 to 99. The
lower switch (10x) is used to set the tens digit and the upper switch (1x) sets the
ones digit. A small slotted screwdriver works well; avoid pencils.
Set the network topology using the 100x switch. 3 is for Ring network topology
and 4 is for Star network topology.
Input/Output module
ControlEdge PLC supports the following I/O modules.
For more information, see "I/O module specification" in the
ControlEdge 900 Platform Hardware Planning and Installation Guide.
Model number
900U01-0100
900A01-0202
900A16-0103
900B01-0301
900G03-0202
900G32-0101
900G01-0202
900H03-0202
I/O module
Universal Input/Output Module (UIO)
Universal Analog Input Module (UAI)
High Level Analog Input Module (16 channels)
Analog Output Module (4 channels)
Digital Input Module (16 channels) - AC Voltage Type
Digital Input Module (32 channels) - DC Voltage Type
Digital Input Module - Contact Type (16 channels)
Digital Output Module (8 channels) - AC Voltage Type
Chapter 3 - Hardware
21