Figure 74 - Redundant Networks (See Table 20) - Honeywell HC900 Installation And User Manual

Communications Installation - Connecting the HC900 Controller to a PC with the Designer Software
Connecting C75 Redundant Ethernet to a PC with HC Designer or other applications
Only use Shielded CAT 5 cable IO for network connections. See Figure 74 and Table 20.
.
Figure 74 – Redundant Networks (see Table 20)
ATTENTION:
Always observe the wiring/cabling guidelines on page 45.
Revision 19 HC900 Process Controller Installation and User Guide 135
06/14