Dual Ethernet; Separated Networks - Honeywell CIPer 50 User Manual

Dual Ethernet

The CIPer Model 50 is equipped with a Dual Ethernet interface.
All information about the Dual Ethernet can be found in the CIPer 50 Installation & Commissioning Instructions
(31-00233EFS).

Separated networks

SEPARATED NETWORKS = DEFAULT SETTING
For cyber security reasons, the default setting of the Dual Ethernet is with the following IP settings:
• Ethernet port 1: IP address 192.168.200.20, subnet 255.255.255.0
•
Ethernet port 2: IP address 192.168.201.20, subnet 255.255.255.0
17
WEBs CIPer Model 50 – USER GUIDE
31-00198—01