Uploading A Project - Honeywell ControlEdge 900R04-0200 Getting Started

Chapter 5 - Operating

Uploading a project

82
a. On the Selection Panel, select the FDAP.
b. On the Property Panel, expand
c. Under
Identification
It is only applicable for ControlEdge 900 controller and Redundant
ControlEdge 2020 controller.
If a project is archived in a controller, you can upload and open this
project in ControlEdge Builder. Alternatively, you can upload and save
it to the PC.
ATTENTION: Only Administrator or Engineer levels can upload a
project.
Prerequisite
The project must be archived as a zip file in the controller. See
"Downloading a project to the controller" on page 1 for more
information.
To upload a project
1. From the Home Page, select
dialog appears.
Confirmation
2. There are two options:
Click . If a project is already open when you upload this
Open
l
project, the open project will be saved and closed.
The uploaded project is saved to the following location by
default: C:\Users\Public\Documents\ControlEdge
Builder\ArchivedProjects
Click to open the project in ControlEdge Builder.
OK
Click , and select a location to save this project. Click
Save As
l
The uploaded project is stored in a folder named "Project name_
Date_Time".
Device Manager Summary
, check .
Revision
>
More Project Upload
.
. The
Upload
.
OK