Honeywell ControlEdge 900R04-0200 Getting Started page 54

Chapter 4 - Software
Features
Wireless I/O
Data logging
EFM
Secured communication
54
Prerequisite
Make sure the IP addresses for the PCs installed simulator and
ControlEdge Builder are on the same subnet.
One virtual machine only supports one controller simulator.
Procedures
1. Install a virtual machine. Two virtual machines are verified:
VMware Workstation Player 12.5.8 or higher hypervisor
l
VMware vCenter Server 6.0.0 or higher hypervisor
l
For more information, see the vendor's documents.
2. Import or open an OVA file in the virtual machine, and play the
virtual machine. Honeywell provides three OVA files stored in
Simulator folder in the Media.
RXXX indicates the release number.
ControlEdge 900 controller: ControlEdge_PLC_900CP1_
l
RXXX.ova
ControlEdge 2020 controller:
l
Non-redundant controller: ControlEdge_RTU_SCUCMX01_
l
RXXX.ova
Redundant controller: ControlEdge_RTU_SCUCNN11_
l
RXXX.ova
Take VMware Workstation Player 12.5.8 as an example here:
a. Click >
Player
appears.
> , the
File Open Open Virtual Machine
Support
No
No
No
No
dialog