Honeywell ControlEdge 900R04-0200 Getting Started page 8

Chapter 1 - About this guide
Terminology Description
ACE
Adapter
Assembly
CDA
ControlEdge
Builder
CPM
DTM
EDS
EPM
Expansion
I/O rack
Expansion
IOM
FDAP
FDM
FTE
HMI
IOTA
Left End
Plate
Local I/O
rack
Mixed IOM
8
Application Control Environment
A communication device which connects to the EtherNet/IP network to
serve data from a set of devices or modules underneath it. Adapter
typically supports I/O connectivity from Scanners via implicit
EtherNet/IP connections.
A set of data passed between a Originator and a Target after an implicit
I/O connection has been established on an EtherNet/IP network.
Control Data Access
A integrated configuration tool to design, configure, program and
maintain ControlEdge controllers.
Control Processor Module
Device Type Manager
Electronic Data Sheet. A text file which specifies all the properties of an
EtherNet/IP device necessary for a Scanner module to communicate
with it. EDS files my be used in the first step of creating an I/O module
or device type for interfacing to an EtherNet/IP device.
Expansion Processor Module
I/O rack with EPM installed
I/O Module (IOM) external to the CPM that expand the I/O capacity
Field Device Access Point
Field Device Manager
Fault Tolerant Ethernet
Human Machine Interface
Input Output Termination Assembly
Left end plate is used only in multi-row 2020 I/O systems. It starts a new
row of IOMs and provides connections for 24Vdc supply to the row
along with I/O Network connections.
I/O rack with CPM installed (non-redundant)
Mixed input/output module, which supports DC current or voltage type