Display Rpr Mac - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
Local Reserved bandwidth for class A0
on ringlet0
Local Reserved bandwidth for class A0
on ringlet1
Local Rate-limiter bandwidth for high on
ringlet0
Local Rate-limiter bandwidth for high on
ringlet1
Local Rate-limiter bandwidth for medium
on ringlet0
Local Rate-limiter bandwidth for medium
on ringlet1
Local Rate-limiter bandwidth for low on
ringlet0
Local Rate-limiter bandwidth for low on
ringlet1
Total Reserved bandwidth for class A0
on ringlet0
Total Reserved bandwidth for class A0
on ringlet1

1.1.7 display rpr mac

Syntax
display rpr mac [ count | vlan-id vlan-id | eth-mac user-mac-addr | rpr-mac
rpr-mac-addr | { RprPos | Rpr10GE | RprGE } interface-name ]
View
Any view
Parameters
count: Number of MAC addresses learnt by an RPR port.
vlan-id vlan-id: VLAN ID.
eth-mac user-mac-addr: User MAC address.
rpr-mac rpr-mac-addr: RPR station MAC address.
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
Field
1-17
Chapter 1 RPR Port Configuration Commands
Description
Locally reserved bandwidth for class A0
on ring 0
Locally reserved bandwidth for class A0
on ring 1
Local rate-limiter bandwidth for class A1
on ringlet0
Local rate-limiter bandwidth for class A1
on ringlet1
Local rate-limiter bandwidth for class
B-CIR on ringlet0
Local rate-limiter bandwidth for class
B-CIR on ringlet1
Local rate-limiter bandwidth for class C
and class B-EIR on ringlet0
Local rate-limiter bandwidth for class C
and class B-EIR on ringlet1
Totally reserved bandwidth for class A0
on ring 0
Totally reserved bandwidth for class A0
on ring 1