Command Manual – RPR
H3C S9500 Series Routing Switches
View
Any view
Parameters
dmac: Destination MAC address.
smac: Source MAC address.
mac-address: You can input in the format of H-H-H to query the source station bridge
MAC address. All 0 indicates displaying MAC addresses of all stations in the ring.
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
interface-number: Port number.
Description
Use the display rpr statistics command to query the traffic statistics information of
packets sent from other stations to local station or from the local station to other
stations. .
Examples
# Query the traffic from station with bridge MAC address 000F-E211-1116 in the ring.
<H3C> display rpr statistics smac 000f-e211-1116 RprPos3/1/1
Source statistics of
Mac address: 000f-e211-1116 Packets: 0 Bytes: 0
1.1.11 display rpr timers
Syntax
display rpr timers [ { RprPos | Rpr10GE | RprGE } interface-number ]
View
Any view
Parameters
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
interface-number: Port number.
Chapter 1 RPR Port Configuration Commands
interface: RprPos3/1/1
1-22