Frame-Format; Interface { Rprpos | Rpr10Ge | Rprge } Interface-Number; Interface { Rprpos | Rpr10Ge | Rprge } Interface-Number . { 1 | 2 - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
Examples
# Configure overhead byte for the RPR port.
<H3C> system-view
[H3C] interface RprPos 2/1/1.1
[H3C-RprPos2/1/1.1] flag c2 22

1.1.14 frame-format

Syntax
frame-format { sdh | sonet }
undo frame-format
View
RPR POS physical port view
Parameters
sdh: Specifies the framing format as SDH.
sonet: Specifies the framing format as SONET.
Description
Use the frame-format command to configure the framing format on the RPR POS
physical port.
Use the undo frame-format command to restore the default configuration.
By default, the framing format is SDH.
Examples
# Configure the RPR port RPRPOS 2/1/1.1 to use SDH framing format.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface RprPos 2/1/1.1
[H3C-RprPos2/1/1.1] frame-format sdh

1.1.15 interface { RprPos | Rpr10GE | RprGE } interface-number

Syntax
interface { RprPos | Rpr10GE | RprGE } interface-number
View
System view
Chapter 1 RPR Port Configuration Commands
1-26