Display Rpr Cross-Ring Instance - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
Table 4-2 Description on the fields of the display rpr cross-ring defect command
Inconsistent number of slave
rings
Inconsistent instance mapping
configuration
Inconsistent instance role
configuration
false
true

4.1.5 display rpr cross-ring instance

Syntax
display rpr cross-ring instance { instance-id | all }
View
Any view
Parameters
instance-id: Specifies an instance ID ranging from 0 to 5.
all: Specifies all instances.
Description
Use the display rpr cross-ring instance command to display the basic configuration
and instance information of the specified intersecting ring instance or all intersecting
ring instances.
Examples
# Display information about all intersecting ring instances in the intersecting ring group.
<H3C> display rpr cross-ring instance all
INS: Cross-ring Instance
C-R: Configure Instance Role
L-T(S): Local track port(status)
P: Primary Role
I: Init Role
Neighbor: 000f-e200-fff4
Master-ring: RprPos9/1/1
Slave-ring: RprPos7/1/1
Field
Inconsistent number of slave rings
Inconsistent mapping of intersecting ring
instances to STP instances
Inconsistent intersecting ring role configuration
Configuration consistent
Configuration inconsistent
4-4
Chapter 4 Intersecting RPR Rings Configuration
Description
STP-INS: STP Instance
A-R: Active Instance Role
N-T-S: Neighbor track port status
S: Secondary Role
N: Invalid Role
Commands