Display Rpr Protection - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
interface-name: Interface name.
Description
Use the display rpr mac command to display the information about the user MAC
addresses and RPR station MAC addresses learnt. This command can also display the
number of the user MAC addresses learnt if you specify the count keyword.
If the vlan-id argument is not specified, this command displays all the VLANs the
users belong to.
If the user-mac-addr argument is not specified, this command displays all the user
MAC addresses learnt.
If the rpr-mac-addr argument is not specified, this command displays the mapping
relationship between all the stations and user MAC addresses.
If the interface-name argument is not specified, this command displays the
information about the MAC addresses corresponding to all the RPR logical
interfaces.
Examples
# Display the information about all the user MAC addresses learnt.
<H3C> display rpr mac
Dest-MAC
000f-e211-1116
000f-e272-4a16
Total 2 mac(s) on device 1(RprGE3/1/2).
Table 1-5 Description on the fields of the display rpr mac command
Dest-MAC
RPR-MAC
VLANID
Ringlet
TTL
Total 2 mac(s) on
device 1(RprGE3/1/2)

1.1.8 display rpr protection

Syntax
display rpr protection [ { RprPos | Rpr10GE | RprGE } interface-number ]
RPR-MAC
000f-e251-b1c6
000f-e211-e018
Field
User MAC addresses learnt by an RPR port
MAC address of an RPR station
ID of the VLAN a user belongs to
ID of the ringlet selected for reaching a user from a station
Number of the hops between a station and a user
Number of the MAC addresses an RPR logical interface
learnt
1-18
Chapter 1 RPR Port Configuration Commands
VLANID Ringlet
100 1
6 1
Description
TTL
1
1