H3C S9500 Series Command Manual page 29

Command Manual – RPR
H3C S9500 Series Routing Switches
Parameters
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
interface-number: Interface number.
Description
Use the interface { RprPos | Rpr10GE | RprGE } command to enter RPR logical
interface view.
Examples
# Enter RPR logical interface view.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface RprPos 3/1/1
[H3C-RprPos3/1/1]
1.1.16 interface { RprPos | Rpr10GE | RprGE } interface-number . { 1 | 2 }
Syntax
interface { RprPos | Rpr10GE | RprGE } interface-number . { 1 | 2 }
View
System view
Parameters
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
interface-number { 1 | 2 }: Physical port number.
Description
Use the interface { RprPos | Rpr10GE | RprGE } interface-number . { 1 | 2 } command
to enter RPR physical port view.
Examples
# Enter RPR physical port view.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface RprPos 3/1/1.1
Chapter 1 RPR Port Configuration Commands
1-27