Display L2Vpn Mac-Address - H3C S6800 Series Command Reference Manual

225.1.1.1
225.1.1.2
# Display detailed information about all multicast groups that contain IGMP host-enabled interfaces.
<Sysname> display igmp host group verbose
Vlan-interface10(1.1.1.20):
IGMP host groups in total: 2
Group: 225.1.1.1
Group mode: Exclude
Member state: Idle
Expires: Off
Source list (sources in total: 0):
Group: 225.1.1.2
Group mode: Exclude
Member state: Idle
Expires: Off
Source list (sources in total: 0):
Table 2 Command output
Field
IGMP host groups in total
Vlan-interface10(1.1.1.20)
IGMP host groups in total
Group address/Group
Member state
Expires
Group mode
Source list
sources in total
NOTE:
For more information about the command output, see IGMP in IP Multicast Configuration Guide.
Related commands
igmp host enable

display l2vpn mac-address

Use display l2vpn mac-address to display MAC address entries for VSIs.
Idle Off
Idle Off
Description
Total number of multicast groups that contain IGMP host-enabled
interfaces.
Name and IP address of the IGMP host-enabled interface.
Total number of multicast groups on the interface.
Address of the multicast group.
Member state:
•
Delay—The interface has joined the multicast group, and it has started
the delay timer for sending IGMP reports.
•
Idle—The interface has joined the multicast group, but it has not
started the delay timer for sending IGMP reports.
The delay timer is not user configurable.
Remaining delay time for the interface to send an IGMP report.
This field displays Off if the delay timer is disabled.
Multicast source filtering mode:
•
Include.
•
Exclude.
Multicast sources of the multicast group.
Total number of multicast sources.
4