Command Manual – RPR
H3C S9500 Series Routing Switches
1.1.2 debugging rpr
Syntax
debugging rpr { all | topology | protection | controlframe | mac | ringselection |
tp-frame | l2tunnel | vrrp }
undo debugging rpr { all | topology | protection | controlframe | mac |
ringselection | tp-frame | l2tunnel | vrrp }
View
User view
Parameters
all: All RPR debugging.
topology: Debugging for RPR topology database modular.
protection: Debugging for RPR protection modular request.
controlframe: Debugging for RPR control frame processing.
mac: Debugging for RPR ring selection MAC module.
ringselection: Debugging for RPR ring selection module.
tp-frame: Debugging for RPR TP frame processing.
l2tunnel: Debugging for RPR Layer 2 tunneling.
vrrp: Debugging for VRRP over RPR.
Description
Use the debugging rpr command to enable RPR debugging.
Use the undo debugging rpr command to disable RPR debugging.
By default, RPR debugging is disabled.
Examples
# Enable all debugging for an RPR port.
<H3C> debugging rpr all
1.1.3 display interface
Syntax
display interface [ interface-type | interface-type interface-number [ packets ] ]
View
Any view
Chapter 1 RPR Port Configuration Commands
1-2