Rpr Cross-Ring - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
Neighbor reachable: Unreachable
INS C-R
-----------------------------------------------------------
0 P
1 S
2 S
3 S
4 S
5 S
Table 4-3 Description on the fields of the display rpr cross-ring instance command
neighbour
master-ring
slave-ring
INS
C-R
A-R
STP-INS
L-T(S)
N-T-S

4.1.6 rpr cross-ring

Syntax
rpr cross-ring { master | slave }
undo rpr cross-ring
View
RPR logical interface view
Parameters
master: Specifies the interface as the master ring in the intersecting ring group.
slave: Specifies the interface as the slave ring in the intersecting ring group.
A-R STP-INS L-T(S)
P 1 Not configure
P 2 Not configure
P 3 Not configure
P 4 Not configure
P 5 Not configure
P 6 GigabitEthernet3/2/1 (UP)
Field
MAC address of the neighbor in the intersecting ring group
Maser ring
Slave ring
Intersecting ring instance number
Configured role
Actual role
Number of the corresponding MSTP instance
Upstream port bound with the instance and the port state
State of the upstream port bound with the neighbor
Chapter 4 Intersecting RPR Rings Configuration
Description
4-5
Commands
N-T-S
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN