Rpr Station-Mac; Rpr Station-Name - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
<H3C> system-view
[H3C] interface RprPos2/1/1
[H3C-RprPos2/1/1] rpr static-rs 0016-e266-0101 ringlet0
[H3C-RprPos2/1/1] rpr static-rs 0016-e266-0202 ringlet1

1.1.28 rpr station-mac

Syntax
rpr station-mac
undo rpr station-mac
View
RPR logical interface view
Parameters
None
Description
Use the rpr station-mac command to configure the MAC address of the RPR station
specified by the RPR logical interface. The configured MAC address will be: MAC
address of the RPR station's VLAN interface + 4.
Use the undo rpr station-mac command to restore the default.
By default, the MAC address of an RPR station is the MAC address of the RPR
station's VLAN interface.
Note that the rpr station-mac command cannot be executed on the GERPR interface.
Example
# Configure the MAC address of the RPR station specified by RPRPOS 2/1/1.
<H3C> system-view
[H3C] interface RprPos2/1/1
[H3C-RprPos2/1/1] rpr station-mac

1.1.29 rpr station-name

Syntax
rpr station-name string
undo rpr station-name
View
RPR logical interface view
Chapter 1 RPR Port Configuration Commands
1-37