Rpr Cross-Ring Neighbour - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
intersecting ring instance, and specify a collaboration port for the intersecting ring
instance.
Use the undo rpr cross-ring instance command to remove the configuration.
Examples
# Associate intersecting ring instance 1 with MSTP instance 48, and specify the current
device as the master device of intersecting ring instance 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] rpr cross-ring instance 1 primary stp-instance 48

4.1.8 rpr cross-ring neighbour

Syntax
rpr cross-ring neighbour mac-address
undo rpr cross-ring neighbour
View
System view
Parameters
mac-address: MAC address of the current device's neighbor in the intersecting ring
group. The mac-address argument is in the format of H-H-H and cannot be all 0s,
multicast MAC address, or broadcast MAC address.
Description
Use the rpr cross-ring neighbour command to specify a neighbor for the current
device in the intersecting ring group. The neighbor is uniquely identified by the
specified MAC address. Only one neighbor can be configured for the current device.
Use the undo rpr cross-ring neighbour command to remove the configuration.
Examples
# Specify the device with the MAC address 000F-E25A-D720 as the neighbor of the
current device.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] rpr cross-ring neighbour 000f-e25a-d720
Chapter 4 Intersecting RPR Rings Configuration
4-7
Commands