Chapter 5 Distributed Rpr Configuration Commands; Distributed Rpr Configuration Commands; Debugging Rpr Backup; Display Rpr Link-Aggregation - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
Chapter 5 Distributed RPR Configuration

5.1 Distributed RPR Configuration Commands

5.1.1 debugging rpr backup

Syntax
debugging rpr backup { debug | error | event }
undo debugging rpr backup { debug | error | event }
View
User view
Parameters
debug: Debugging for distributed RPR.
error: Debugging for distributed RPR errors.
event: Debugging for distributed RPR events.
Description
Use the debugging rpr backup command to enable debugging for distributed RPR.
Use the undo debugging rpr backup command to disable the debugging.
By default, the debugging is disabled.
After you execute the debugging rpr all/undo debugging rpr all command, the
debugging for distributed RPR is enabled/disabled.
Examples
# Enable debugging for distributed RPR errors.
<H3C> debugging rpr backup error

5.1.2 display rpr link-aggregation

Syntax
display rpr link-aggregation [ group agg-id ]
View
Any view
Commands
5-1
Chapter 5 Distributed RPR Configuration
Commands