Rpr Weight - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
tc-fast value: Sets the TC-fast timer. The value argument ranges from 1 to 20 (in
milliseconds).
tc-slow value: Sets the TC-slow timer. The value argument ranges from 50 to 1,000 (in
milliseconds).
wtr value : Sets the WTR timer. The value argument ranges from 0 to 1440 (in seconds).
The system default is 10 seconds.
keepalive value: Sets the keepalive timer (in million seconds). The value argument
ranges from 2 to 50 and must be a multiple of 1. The system default is 10 ms.
mac-aging value: Sets the MAC aging timer (in seconds). The value argument ranges
from 0 to 600 and must be a multiple of 1. The system default is 30 seconds.
Description
Use the rpr timer to set a timer.
Use the undo rpr timer command to restore the setting of a timer to the default.
Caution:
When configuring mac-aging keyword on a 10G or 2.5G RPR port, make sure the
value is a multiple of 10.
Examples
# Set the ATD timer to 3 seconds.
<H3C> system-view
[H3C] interface RprPos2/1/1
[H3C-RprPos2/1/1] rpr timer atd 3

1.1.31 rpr weight

Syntax
rpr weight { ringlet0 | ringlet1 } value
undo rpr weight { ringlet0 | ringlet1 }
View
RPR logical interface view
Parameters
ringlet0: Configures station weight on Ringlet0.
Chapter 1 RPR Port Configuration Commands
1-39