Display Rpr Fairness - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches

1.1.6 display rpr fairness

Syntax
display rpr fairness [ { RprPos | Rpr10GE | RprGE } interface-number ]
View
Any view
Parameters
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
interface-number: Interface number.
Description
Use the display rpr fairness command to display configurable RPR fairness
parameter values.
Examples
# Display RPR fairness parameters.
<H3C> display rpr fairness Rpr10GE5/1/1
Rpr fairness parameters of the interface:Rpr10GE5/1/1
Station's fairness weight on ringlet0: 1
Station's fairness weight on ringlet1: 1
Local Reserved bandwidth for class A0 on ringlet0: 0Mbps
Local Reserved bandwidth for class A0 on ringlet1: 0Mbps
Local Rate-limiter bandwidth for high on ringlet0: 50Mbps
Local Rate-limiter bandwidth for high on ringlet1: 50Mbps
Local Rate-limiter bandwidth for medium on ringlet0: 0Mbps
Local Rate-limiter bandwidth for medium on ringlet1: 0Mbps
Local Rate-limiter bandwidth for low on ringlet0: 10000Mbps
Local Rate-limiter bandwidth for low on ringlet1: 10000Mbps
Total Reserved bandwidth for class A0 on ringlet0: 0Mbps
Total Reserved bandwidth for class A0 on ringlet1: 0Mbps
Table 1-4 Description on the fields of the display rpr fairness command
Rpr fairness parameters of the interface
Station's fairness weight on ringlet0
Station's fairness weight on ringlet1
Field
1-16
Chapter 1 RPR Port Configuration Commands
Description
RPR fairness parameters of the port
Station's fairness weight on ring 0
Station's fairness weight on ring 1