Chapter 4 Intersecting Rpr Rings Configuration Commands; Intersecting Rpr Rings Configuration Commands; Debugging Rpr Cross-Ring Event; Debugging Rpr Cross-Ring Packet - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
Chapter 4 Intersecting RPR Rings Configuration

4.1 Intersecting RPR Rings Configuration Commands

4.1.1 debugging rpr cross-ring event

Syntax
debugging rpr cross-ring event
undo debugging rpr cross-ring event
View
User view
Parameters
None
Description
Use the debugging rpr cross-ring event command to enable the debugging for
events of intersecting RPR rings.
Use the undo debugging rpr cross-ring event command to disable the debugging.
By default, the debugging is disabled.
After you execute the debugging rpr all/undo debugging rpr all command, the
debugging for events of intersecting RPR rings is enabled/disabled.
Examples
# Enable the debugging for events of intersecting RPR rings.
<H3C> debugging rpr cross-ring event

4.1.2 debugging rpr cross-ring packet

Syntax
debugging rpr cross-ring packet { all | nsn | nrc | psc | flushmac }
undo debugging rpr cross-ring packet { all | nsn | nrc | psc | flushmac }
View
User view
Chapter 4 Intersecting RPR Rings Configuration
Commands
4-1
Commands