Display Rpr Defect - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches
multicast med cir priority
multicast med eir priority
multicast low priority
Traffic Rate (XXX Seconds)
Packets/Sec
transit high priority
transit med cir priority
transit med eir priority
transit low priority
transit unicast
transit multicast
host receive
host transmit
line receive
line transmit
Received Errors
input errors
crc
parity
ttldrop
frame runts
frame giants

1.1.5 display rpr defect

Syntax
display rpr defect [ { RprPos | Rpr10GE | RprGE } interface-number ]
View
Any view
Field
Bits/Sec
1-14
Chapter 1 RPR Port Configuration Commands
Description
Class B0 multicast and broadcast
Class B1 multicast and broadcast
Class C multicast and broadcast
Packet rate and bit rate in a time range, the
value in the brackets can be tuned by the
flow-interval command
Transited Class A traffic
Transited Class B0 traffic
Transited Class B1 traffic
Transited Class C traffic
Transited unicast
Transited multicast and broadcast
Traffic the host receives
Traffic the host sends
Traffic the interface receives
Traffic the interface sends
Error packets the interface receives
Input error statistics, including CRC packets,
parity check packets, runt and giant packets.
CRC packets
Parity check packets
The packets dropped because the TTL becomes
0
Runt frames
Giant frames