Display Rpr Topology - H3C S9500 Series Command Manual

Command Manual – RPR
H3C S9500 Series Routing Switches

1.1.12 display rpr topology

Syntax
display rpr topology { all | ring | local | stations } [ verbose ] [ { RprPos | Rpr10GE |
RprGE } interface-number ]
View
Any view
Parameters
all: Displays complete RPR topology information.
ring: Displays ring-level topology information.
local: Displays local station topology information.
stations: Displays all station topology information on the ring.
verbose: Displays detailed information of the station topology.
RprPos: Specifies the interface type RPRPOS.
Rpr10GE: Specifies the interface type RPR10GE.
RprGE: Specifies the interface type RPRGE.
interface-number: Port number.
Description
Use the display topology command to view topology information.
With the all, ring, local and stations keywords, the command displays different ring
topology information. When the optional parameter is an interface name, the command
displays the topology information of the interface; when the optional parameter is
verbose + interface name, the command displays the detailed information of the
interface; when the optional parameter is verbose only, the command displays the
detailed information of all interfaces.
Ring topology information includes the number of stations in the ring, ring topology type,
maximum transmission unit (MTU) value and others.
Local station topology information includes local station MAC address, protection
status, edge status, and others.
Other station topology information contains MAC addresses for other stations,
protection status, edge status and others.
If you do not specify a port, the command displays all RPR port topology information.
Examples
# View the local topology information.
<H3C> display rpr topology local verbose
Chapter 1 RPR Port Configuration Commands
1-24