Using The Mouse; Keyboard - Danfoss VLT5000 SyncPos Operating Instructions Manual

If you want to change the size of the SyncPos win-
dows, simply move the cursor to an outside edge of
the window and pull - once the cursor has changed
its shape - the window while pressing the mouse
button until the window is the size you desire. The
icons on the upper right in every window do the
following ... ... ... ... ...
Close the window and store as a symbol in the
task bar
Display the window at full screen size
Close the SyncPos program
Close the file, close the dialog window
Cascade windows and vice versa (full size)
Close the window and store as a symbol at the
bottom of the SyncPos window
■ ■ ■ ■ ■ Using the mouse
If you have a mouse with several keys, the left
mouse button is generally the "primary" key (provi-
ded you haven't changed the configuration).
"Click" means that you press the mouse key for a short
moment and then immediately release the button
without moving the mouse. If nothing to the contrary is
stated then always click with the left, or primary, key.
"Pull" means that you point to the element and
hold the mouse button depressed while moving
the mouse.
24
Programmable SyncPos motion controller
■ ■ ■ ■ ■ Keyboard
[ESC] key
In addition to the standard functions of the [ESC] key,
you can also use this key at any time to abort a pro-
gram running under SyncPos.
NB!
A rotating drive will slow down with the
maximum allowed deceleration!
Arrows
Using the arrows, [↓ key], [↑ key], [← key] and [→
key], you can move the insert marks in a file.
Direction keys
With the direction keys [HOME] and [END] you can
move the cursor to the beginning or end of a line
and with [Page ↑] and [Page ↓] to the beginning or
end of a of a screen page. Some direction keys
can also be combined with each other, thus, for
example with [CNTL] + [HOME] the cursor will
move to the beginning of the file.
Number pad
If you have an expanded keyboard available, you
can also input numbers via the number pad, once
you have pressed the [Num lock key] before
inputting numbers.
Short cuts
Keys are often used as shortcuts with other keys
either as a key combination or as a key sequence.
For a key combination you have to hold the first key
depressed while you press the second key, e.g.
[SHIFT] + [INSERT], in order to insert the contents
of the notepad. For key sequences you can press
the keys one after the other, e.g. [ALT] + [E] in order
to open the "EDIT" menu.
Function keys
Frequently used functions are allocated to the
function keys, e.g. with [F9] you can very effectively
control the step-by-step execution of a program:
each time you press [F9], one line of the program is
run. Or with [F1] you can access the on-line help.
MG. 1 0.J8.02 – VLT is a registered Danfoss trade mark