Selecting Traces (Traces) - L3Harris Narda SignalShark User Manual

SignalShark User Manual
You can stop/hold the measurement using the Run key.
To change these parameters:
1. Tap the toggle button to select Hold or Stop.
2. Press the Esc key or tap the header to close the menu.

Selecting traces (Traces)

Here you can select which traces are to be displayed (see Glossary for further explanations):
• +Pk
• RMS
• -Pk
• MxP
• MxR
• AvR
• MnR
• MnP
• Enable All: Tap to select all traces
• Disable All: Tap to deselect all traces
• Inf. Mx/Mn: Tap to switch between On and Off
• Third Detector: Tap to select from dropdown menu: -Pk, Avg, or Smp.
To select the traces to be displayed:
You selected the desired view.
1. Tap the Traces button.
2. Tap a button to switch the trace On / Off.
3. Tap the Enable All button to display all traces.
4. Tap the Disable All button to hide all traces. At least the RMS trace remains on as
default.
5. To set the third director, tap the Third Detector button.
6. Press the Esc key to close the menu.
BACKGROUND
There are three main detectors which compress all spectra occurring in the
measurement time to one spectrum (per measurement time), while the third detector
can have different functions.
Basis Traces:
• Detector 1: +Pk (Plus Peak)
• Detector 2: RMS
• Detector 3: The function of the third detector can be set via the context menu as
follows:
– -Pk (Minus Peak)
– Avg (Average)
– Smp (Sample)
84