Narda Recovery Stick - L3Harris Narda SignalShark User Manual

3. Tap on USB Backup and Recovery.
4. Tap on Apply Image.
5. Tap OK.
6. When the image is recovered, tap OK, then tap Reboot.

Narda Recovery Stick

We recommend making a backup of the device system partition using the "Narda Recovery
Environment". With this toolset, you can recover the system image in case of malfunctions. If
you missed to make a backup image or you cannot reach the "Narda Recovery Environment"
anymore, Narda offers a bootable, ready-to-use USB recovery stick.
NOTICE – Restoring the device from system image.
If you restore your device from a system image, it is a complete restoration of the system
partition (c:\). All actual system settings, files that has been stored on the system partition
and additionally installed applications including software options will be lost. Measurement
data is stored on the data partition (d:\) and will be not affected by this process. Although
the Windows license is still valid after the restore process, you may want to activate
Windows.
To use the Narda Recovery Stick
If the operating system fails to start, the system will automatically boot into the Narda
Recovery Environment. If so, please follow the steps below to restore the device system from
USB stick:
1. Insert the Narda Recovery Stick into the upper USB-Port (USB 3.0).
2. Tap on the Boot from USB icon (taping on the text will have no effect).
3. Wait until the recovery menu has started up completely
4. If your device fulfills all requirements you can do the following:
– To proceed restore: Press the
– To exit restore and reboot: Tap Exit/Reboot button.
icon.
Administration
209