Table of Contents
Advertisement
1. Tap the Lmax button.
The context menu opens.
2. Tap the Entry Mode button to select Abs. (Absolute) or Rel. (Relative).
3. Press the Esc key twice to close the menus.
Lrange
The Lrange button allows you to set the range of the y-axis.
To set the y-axis range:
1. Tap the Display button.
2. Tap the Lrange button.
3. Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
4. Press the Esc key to close the menu.
Unit
The Unit button allows you to set the unit of the y-axis.
To set the y-axis unit:
1. Tap the Display button.
The menu opens.
2. Tap the Unit button.
3. Select the required unit from the dropdown list.
4. Press the Esc key twice to close the dropdown list and the menu.
Bearing View
157
Advertisement
Table of Contents
