Selecting A Data Type; Select Ftune; Selecting Data Sets - L3Harris Narda SignalShark User Manual

To zoom in/out:
Tap the corresponding button to set the desired zoom level.

Selecting a data type

A map can visualize several types of data:
Data type
No data
General
Localization
Localizations
Bearings
To select a data type:
1. Tap the Data Type button and select an entry from the dropdown list.
2. Press the Rotary knob or the OK key.

Select Ftune

This button shows the frequency set in the Spectrum view or in the Bearing view.
For more information about setting Ftune see

Selecting data sets

Select a data set according to your needs:
• FEHLER: Variable (discrete) ist nicht definiert.: when performing discrete bearings
• open record: when performing a localization with saved bearings
To select data sets:
1. Tap the Select Data Sets button and select an entry from the dropdown list.
Description
No data is displayed in the map.
Shows all stored localizations marked with a flag.
This determines the transmitter position while recording current
bearings. For heatmap localization choose this data type.
All stored localization results in the current working directory are
displayed.
Discrete bearings are displayed in the map.
Spectrum View or Bearing
Map View
View.
193