Table of Contents
Advertisement
module used and the polarization plane are automatically detected by the basic unit. The
power supply is provided from the basic unit via the separate data cable.
Figure:
Antenna handle
An arm support, which simply clips on to the handle and allows effortless long term use.
Figure:
Antenna handle with arm support
Narda directional antennas
Three Narda directional antennas that are specially matched to the SignalShark and which fit
the antenna handle are available. They cover the frequency range from 20 MHz to 8 GHz. A
highly sensitive loop antenna is also available as an accessory for covering the lower
frequency range from 9 kHz to 30 MHz.
You can of course also use directional or omnidirectional antennas from other manufacturers
with the SignalShark. Even Direction Finding is available when using the antenna with the
antenna handle and adapter.
Introduction
29
Advertisement
Table of Contents
