Spectrogram View
Available buttons
For information about the different types of buttons and how to select them see
Button
bar.
Tap a button to change setting or to open the submenu.
Ref. Level / Attenuator
Lmax
Lrange
Fcent/Fspan, Fstart/Fstop
RBW / EBW
Meas. Time
Config
Detectors
Display
Demod.
Setting the reference level / attenuation value
(Ref. Level / Attenuator)
Here you can do the following:
• Set the Reference Level (RL) or Attenuator value.
• Select the RF input
• Select +5 dB / -5 dB
• Switch Preamp On / Off
• Switch Ext. Device On / Off
Select Unit
•
The Reference Level is an indirect way to set the current attenuator value. It defines the
maximum measurable level. For better convenience it also sets the upper axis limit of the
view.
You can stop this coupling by setting the entry mode to Abs.in the Display settings:
1. Tap the header of the desired view.
2. Tap the Display button.
3. Tap the Freq. Axis button and switch between Abs. and Rel..
4. Press the Esc key twice to close the menus.
Background information about the Reference Level
121