Normal Range; Unit; Tone; Tone Volume - L3Harris Narda SignalShark User Manual

Horizontal Scan

Normal Range

Tap this button to set back to the normal range setting.

Unit

The Unit button allows you to set the unit of the y-axis.
To set the y-axis unit:
1. Tap the Unit button.
2. Select the required unit from the dropdown list and tap the X button to close the dropdown
list.

Tone

Tap this button to switch the tone on / off.

Tone Volume

To set the tone volume:
1. Tap the Tone Volume button.
2. Enter the required percentage value and confirm with OK.
3. Optionally, tap the Tone Mute button to switch the tone on / off.

Equalizer

Tap this button to switch the Equalizer on / off.

Spirit Level

Tap this button to switch the Spirit Level on / off.

Demodulation (Demod.)

Here you can change the demodulation settings and record demodulated signals.

Setting Ref. Level, Atten., Ftune and CBW/EBW

See description in Changing the measurement settings.

Selecting a demodulation type (Demod. Type)

Tap Demod. Type button and select an entry from the dropdown list.
173