Narda Recovery Environment - L3Harris Narda SignalShark User Manual

SignalShark User Manual
4. Select Computer Configuration > Administrative > Templates > Windows Components >
Windows Defender
5. Double tap Turn off windows defender and disable policy.
6. Select Real-time Protection.
7. Double tap Turn off real-time protection and enable policy.
8. Disable following policies:
– Turn on behavior monitoring.
– Monitor file and program activity on your computer.
– Turn on process scanning whenever real-time protection is enabled.

Narda Recovery Environment

The tool enables you to:
• Backup your system to a USB device
• Recover your system from a USB device
– Use your own made backup image
– Use a Narda system image.
You can download a current image from the Narda website.
NOTICE: All changes that you have made to the system will be
lost. The data partition is not affected.
Opening the Narda Recovery Environment
Tap on the Narda Recovery Environment icon on the desktop.
Windows will shutdown within 10 seconds and start the Narda Recovery Environment.
Following menu is displayed:
• Continue: Windows will start normal
• Shutdown: System will shutdown
• Boot from USB: This can be used to boot from the Narda Recovery Stick
• USB Backup and Recovery: This is the backup and recovery tool
Creating a backup image
Depending on the performance of your removable USB storage device, this process will
take at least 10 minutes.
1. Open the Narda Recovery Environment as explained above.
2. Plug in a removable USB storage device (recommended USB 3.0, min. 16 GByte, NTFS
formatted).
3. Tap on USB Backup and Recovery.
4. Tap on Capturel Image.
5. Tap OK.
6. When the image is created, tap OK, then tap Reboot.
Recovering a backup image
1. Open the Narda Recovery Environment as explained above.
2. Plug in a removable USB storage device (recommended USB 3.0, min. 16 GByte, NTFS
formatted).
208