SignalShark User Manual
2. Select one of the units (dBm, dBV, dBmV, dBuV) and close the menu by tapping the x
button.
Normal Range
Tap this button to set back to the normal range setting.
Unit
The Unit button allows you to set the unit of the y-axis.
To set the y-axis unit:
1. Tap the Unit button.
2. Select the required unit from the dropdown list and tap the X button to close the dropdown
list.
Tone
Tap this button to switch the tone on / off.
Tone Volume
To set the tone volume:
1. Tap the Tone Volume button.
2. Enter the required percentage value and confirm with OK.
3. Optionally, tap the Tone Mute button to switch the tone on / off.
Equalizer
Tap this button to switch the Equalizer on / off.
Spirit Level
Tap this button to switch the Spirit Level on / off.
Demodulation (Demod.)
Here you can change the demodulation settings and record demodulated signals.
Setting Ref. Level, Atten., Ftune and CBW/EBW
See description in
Changing the measurement
Selecting a demodulation type (Demod. Type)
Tap Demod. Type button and select an entry from the dropdown list.
Inheriting a demodulation type from the transmitter table (Tx. Tab –>
Type)
Tap button to switch On.
When set to On, the demodulation type is inherited from the transmitter setting of the
selected transmitter table.
168
settings.