Setting The Max. Power Level (Lmax) - L3Harris Narda SignalShark User Manual

Ref. Level / Attenuator
Lmax
Lrange
Ftune
CBW / EBW
Pre Avg.
Meas. Time
Config
Detector
Display and Tone
Demod.
Tap this button to open the demodulation menu.
Next step:
See Step 3 - Running and saving a horizontal scan

Setting the max. power level (Lmax)

Here you can change the maximum power level settings.
Lmax
1. Tap the Lmax button.
2. Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
3. Press the Esc key to close the menu.
Ref.L. –> Lmax
Sets the reference level as Lmax when set to On.
Tap to set On or Off.
Default Range
Tap to set the range to the default value.
Unit
1. Tap the Unit button.
The Unit dropdown menu opens.
Horizontal Scan
163