Bearing View; Available Buttons - L3Harris Narda SignalShark User Manual

Bearing View

Bearing View
The Bearing view is the main view within the Auto DF task. Based on the Level Meter view,
it contains all parameters to setup a bearing. While it shows bearing and level results,
localizations can be determined with the Map view.
The content linked below describes the settings in the Bearing view. For a detailed
description how to perform automatic direction finding (Auto DF) see Performing
Automatic Direction Finding.
For fast and easy frequency settings, Ftune is coupled to Fcent of the Spectrum view (see
Spectrum view). CBW defines the relevant channel bandwidth for the bearing. In the
Spectrum view, CBW of the Bearing view is highlighted in blue.

Available buttons

For information about the different types of buttons and how to select them see Button bar.
Tap a button to change setting or to open the submenu.
145