RefL/Attn Reference level
Input
RF input
Fcent
Center frequency
Fspan
Displayed frequency span
RBW
Resolution bandwidth
Status of running measurement
Meas. Time The measurement or detector time defines the time
range used by the internal detectors to calculate their
values (+Pk, RMS, -Pk, ...). For spectrogram, this is
the time of one spectrogram line.
Scan No.
Number of measurements since starting run.
Scan Count Number of measurement cycles for one single run.
This parameter also controls the memory depth of the
MxP, MxR, MnR and MnP traces.
Screen Overview
65