Unit; Freq. Axis; Demodulation (Demod.); Setting Ref. Level, Atten., Ftune And Cbw/Ebw - L3Harris Narda SignalShark User Manual

SignalShark User Manual
• Set the range of the y-axis
• Set the Couple Views function On or Off
• Select Default Range or Auto Range
• Select the Unit
To set the y-axis range:
1. Tap the Lrange button.
2. Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
To select the unit:
1. Tap the Unit button.
The Unit dropdown menu opens.
2. Select one of the units (dBm, dBV, dBmV, dBuV) and close the menu by tapping the x
button.

Unit

The Unit button allows you to set the unit of the y-axis.
To set the y-axis unit:
1. Tap the Display button.
The menu opens.
2. Tap the Unit button.
3. Select the required unit from the dropdown list.
4. Press the Esc key twice to close the dropdown list and the menu.

Freq. Axis

The Freq. Axis button allows you to switch between Abs. and Rel.:
1. Tap the Display button.
The menu opens.
2. Tap the Freq. Axis button to switch between Abs. and Rel..
3. Press the Esc key twice to close the dropdown list and the menu.

Demodulation (Demod.)

Here you can change the demodulation settings and record demodulated signals.

Setting Ref. Level, Atten., Ftune and CBW/EBW

See description in Changing the measurement

Selecting a demodulation type (Demod. Type)

Tap Demod. Type button and select an entry from the dropdown list.
130
settings.