Changing General Display Settings (Display); Unit; Sort By; Show Transmission - L3Harris Narda SignalShark User Manual

– MnR (Minimum of RMS)
• Detector 3 (depending on the configuration):
– MnP (Minimum of Minus Peak)
– MxA (Maximum of Average)
– MxS (Maximum of Sample)

Changing general display settings (Display)

Here you can change general display settings such as the zero point of the Y-axis, the range
of the Y-axis or the axis unit (the available settings depend on the current view).
To open the Display menu:
You selected the desired view.
1. Tap the Display button.
The Display menu opens.
2. You can now do the following:

Unit

The Unit button allows you to set the unit of the y-axis.
To set the y-axis unit:
1. Tap the Display button.
The menu opens.
2. Tap the Unit button.
3. Select the required unit from the dropdown list.
4. Press the Esc key twice to close the dropdown list and the menu.

Sort by

The Sort by button allows you to select a sorting algorithm:
1. Tap the Display button.
The menu opens.
2. Tap the Sort by button to select an option from the dropdown list.
3. Press the Esc key twice to close the dropdown list and the menu.

Show Transmission

1. Tap the Display button.
The menu opens.
2. Tap the Show Transmission button and set to On or Off.
3. Press the Esc key twice to close the dropdown list and the menu.

Other Traces

1. Tap the Display button.
The menu opens.
Peak Table
143